MSM8953__Xiaomi__xiaomi__ANDR_v7.0__Redmi_Note_4__mido_

MSM8953__Xiaomi__xiaomi__ANDR_v7.0__Redmi_Note_4__mido__mido

Bk Mobile Zone July 03, 2018

MSM8953Xiaomixiaomi__ANDR_v7.0__Redmi_Note_4midomido

MSM8953__Xiaomi__xiaomi__ANDR_v7.0__Redmi_Note_4__mido__mido

Xiaomi Redmi Note 4 Firmware Tested by BkMobileZone

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 625 [MSM8953]
ID_BLOCK_S : BDA2F068
ID_BLOCK_L : E6A3201EAEA56B4E4719A79E72E0183F
ID_BLOCK_L : 6A8AE04796A1A17966C1020572E43075
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HCG8a4
Boot Ok!

Brand     : xiaomi
ProdName : mido
ProdModel : Redmi Note 4
Device    : mido
AndroidVer: 7.0
Manufact. : Xiaomi
QLMxCPU   : MSM8953

DevInfo : MSM8953__Xiaomi__xiaomi__ANDR_v7.0__Redmi_Note_4__mido__mido

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : devcfg.mbn
[Read Ok] : adspso.bin
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : splash.img
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : mdtp.img
[Read Ok] : lksecapp.mbn
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : cust.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8953 / eMMC
Firmware Size : 2905 MiB

Done!
Elapsed: 00:06:45

Reconnect Power/Cable!